The Gigamon Community is a great way to get answers fast, learn from experts and collaborate directly with other members around your areas of interest. ![]() The Gigamon Community is a technical site where Gigamon users, partners, security and network professionals and Gigamon employees come together to share knowledge and expertise, ask questions, build their network and learn about best practices for Gigamon products. All other trademarks are the trademarks of their respective owners Trademark Attributions: Gigamon and the Gigamon logo are trademarks of Gigamon in the United States and/or other countries. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without Gigamon’s written permission. This online documentation was last updated: Ĭopyright: Copyright © 2020- 2022 Gigamon Inc. Most were pretty old-school, with individual rectifier diodes and caps, and some kind of transformer. Most of them ran off of a custom 48V supply that was stepped down and rectified line voltage (120 VAC here in North America). Each online documentation portal also provides PDFs associated with that release. I looked up several phantom power supplies. Visit the Online Product Documentation page on the Gigamon Community to find the latest documentation offerings available online. ![]() Repeat Step 2 and Step 3 for the other power supply module in the GigaVUE‑HC1 chassis. Run the wires to avoid obstructing airflow for the adjacent fans. Turn on the SMPS-1 Power ON/OFF switch 5. Connect the SMPS-1 to the AC power supply (115230VAC) 4. Connect the SMPS-1 Signal Output to your mixer 3. Important: The leads to the DC power supply modules on the GigaVUE‑HC1 node should attach from the side of the chassis away from the terminal block. are using the Nady SMPS-1 Phantom Power Supply, connect in the following order: 1. Xvive P1 Phantom Power Supply 48V/12V Switch,Up to 40 Hours of Use,Rechargeable Low Noise Portable Phantom Power for Condenser Microphones, Recording Studios, Audio Equipment 4. If PSM grounding is required, connect earth ground to the SAFETY GROUND (green/yellow) terminal using a straight blade screwdriver.Ĭonnect the positive and negative power wires to the appropriate terminals using a straight blade screwdriver.Ĭonnect positive source wire to the + RETURN (black) terminal using a straight blade screwdriver.Ĭonnect -48V source wire to the -48V (blue) terminal using a straight blade screwdriver. Plug the DC power cable adapter into the DC power supply. To connect a -48V DC input to the DC power supply module: 1. This section provides instructions for connecting a -48V DC power source to the DC power supply modules. ![]() The GigaVUE‑HC1 is available with DC power supply modules. Buy the best and latest phantom power supply 48v on offer the quality phantom power supply 48v on sale with worldwide free shipping.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |